Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Be aware that depending on the unbalance of the gate and the adjusted clutch
configuration, the control unit may shut down the engine without obstacle. We
recommend leaving the gate as balanced as possible.
To set the anti-crush set the PROG switch to the position as shown in the figure
below, and press the LEARN button according to desired setting:
PROG SWITCH POSITION
18 - ACCELERATION RAMP
To set the acceleration ramp set the PROG switch to the position as shown in
the figure below, and press the LEARN button according to the desired setting:
PROG SWITCH POSITION
LONG AVERAGE
19 - OPENING DECELERATION RAMP
68
1 time
100%
4 times
40%
1 time
SHORT
4 times
LED BLINKS
2 times
80%
5 times
20%
ACCELERATION RAMP
LED BLINKS
2 times
SHORT AVERAGE
5 times
LONG
INGLÊS
PROGRAMMING
ANTI-CRUSH
3 times
60%
-
-
PROGRAMMING
3 times
AVERAGE
-
-
Publicidad
Tabla de contenido
