Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To set the deceleration ramp set the PROG switch to the position as shown in
the figure below, and press the LEARN button according to the desired setting:
PROG SWITCH POSITION
1 time
SHORT
4 times
LONG AVERAGE
20 - CLOSING DECELERATION RAMP
To set the deceleration ramp set the PROG switch to the position as shown in
the figure below, and press the LEARN button according to the desired setting:
PROG SWITCH POSITION
1 time
LOW
4 times
LONG AVERAGE
21 - MINIMUM OPENING DISTANCE
In this configuration, the control panel calculates the current distance from the
deceleration ramp to the opening limit switch and keeps the engine speed to a
minimum until it reaches the limit switch.
To set the distance set the PROG switch to the position as shown in the figure
OPENING DECELERATION
LED BLINKS
2 times
SHORT AVERAGE
5 times
LONG
CLOSING DECELERATION
LED BLINKS
2 times
LOW AVERAGE
5 times
LONG
INGLÊS
PROGRAMMING
3 times
AVERAGE
-
-
PROGRAMMING
3 times
AVERAGE
-
-
69
Publicidad
Tabla de contenido
