Leviton HDX Fiber Optic Manual De Instalación Y Funcionamiento página 34

6 TRUNK INSTALLATION
6.1.5 Mount the cable clamp to the Frame by inserting the clamp base at the desired location
and sliding until the mounting pin engages the hole (Figure 25).
6.1.6 Route trunk breakout legs to the correct deck and tray.
6.1.7 Shown here is an example of a 48-strand trunk cable being placed into trays A and B of
the target deck.
6.1.8 Repeat the previous step for each trunk being routed to the target deck.
6.1.9 Once all cabling is placed in the Rear Routing Guide, patch the trunk assemblies to the
target cassette or adapter plate.
Figure 25
34