Steren MUL-300 Manual De Instrucciones página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.- If you notice any kind of malfunction or abnormality, stop all
use of your multimeter until it is checked by authorized
personnel.
4.- Never use your multimeter if the protective cover is not
properly placed.
5.- Clean your multimeter periodically with a clean humid rag and
soft detergent. Never use solvents or abrasives in order to clean
your multimeter.
6.- If the multimeter is going to be stored without use for an
extended period of time, remove the batteries in order to prevent
damage to your multimeter.
DESCRIPTION
This multimeter is a professional instrument.
3 ½ digit LCD screen, 28 mm tall, with polarity indicator and
readings up to 1999 counts.
DC voltage measurements
AC voltage measurements
DC Amps measurement
AC Amps measurement
Temperature measurement
Resistance measurement
Capacity measurement
Diodes measurement
Audible continuity test
On / Off button
Light button (5 seconds length)
Hold button
RANGE FUNCTION AND SELECTOR
This multimeter is a professional, portable instrument, with a
large LCD screen for an easy reading. It has special
characteristic, in order to avoid a bad connection of the testing
points. The input female jacks (red colour) are made specially
for functions and ranges. Using a mechanic block system, it will
allow us to choose the right position of the testing points.
If the testing points are plugged and you turn the dial, you
cannot perform the operation until you remove the red testing
point. Then fi rst, remove the point and then set the dial in the
required range, after that, replace the testing point in the
available connector (the others are blocked)
ENGLISH-3

Publicidad

Tabla de contenido
loading

Tabla de contenido