Security Information - Steren MUL-300 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before using your new Professional Multimeter, please read
Before using your new Professional Multimeter, please read
this instruction manual to prevent any damage. Put them
this instruction manual to prevent any damage. Put them
away in a safe place for future references.
away in a safe place for future references.

SECURITY INFORMATION

This multimeter has been designed according to IEC-1010
specifi cations for electronic testing equipment.
When using your multimeter, observe the following safety rules:
Protection against damages caused by electrical current.
Protection against damages caused by inadequate use.
The testing points meet all safety standards, if you need to
replace these make sure the new testing points have the
same characteristics or are the same model points.
Never exceed the indicated limits in each measuring range.
When the multimeter forms a bridge with the circuit that is to
be measured, don't touch the points that are being used to
measure.
When you don't know the range of the equipment to be
measured, set the dial to the highest range possible.
Before adjusting the dial to a different range or a different
function, disconnect the testing points from the multimeter.
When you break the power circuits, remember that the
voltage amplitude pulses can be higher than normal, and
this pulses can damage the meter.
Never measure resistance, capacity, inductance, diode, or
continuity on live circuits.
Whenever measuring voltages above 60 VDC or 30 VAC
rms, place your fi ngers above the protection rings on the
testing points.
Do not store or use this meter in places exposed to direct
sun light, high temperatures, humidity or condensation.
MAINTENANCE
1.- Before opening your multimeter, always disconnect the
testing points from the multimeter's source of electrical current.
2.- For an effective protection against fi re, always replace a fuse
with one that has the same characteristics in voltage and current:
15A / 250V.
ENGLISH-2

Publicidad

Tabla de contenido
loading

Tabla de contenido