Bosch MSM6 Serie Instrucciones De Uso página 16

en
Dicer
Important information:
– Fruit / vegetables should not be too ripe,
as the juice may escape.
– Leave cooked food to cool down before
dicing it, as it will then be firmer and the
dicing result will be better.
– The length of the cubes can be influ-
enced by increasing or reducing the
pressure on the pusher.
Fig. H
■ Place bowl on a smooth and clean work
surface.
■ Insert the cutting grid into the base
holder. Observe recesses!
■ Undo the catches on the base holder and
insert cutter disc into the base holder.
■ Fasten the catches.
■ Place the dicer under the lid (arrow
on dicer pointing to arrow on lid) and
turn anti-clockwise as far as it will go
(Fig. H-3).
■ Place lid on the bowl and turn all the way
anti-clockwise. Lock on the handle must
be correctly engaged.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold base unit and multi-function
accessory firmly and switch on appliance
(turbo speed).
■ Place the food to be diced in the feed
tube. If required, apply light pressure
to the pusher. If required, chop up food
beforehand.
■ Release the On button after processing.
Warning!
Empty the bowl before it becomes so full that
the diced food reaches the dicer.
To do this:
■ Turn the lid together with dicer clockwise
and remove.
■ Empty the bowl.
■ Place lid on the bowl again and turn
all the way anti-clockwise. Lock on the
handle must be correctly engaged.
16
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the attachment.
■ Turn lid clockwise and remove from the
bowl.
Depending on the tool / insert used:
■ Take hold of the universal blade by the
plastic handle and take out.
or
■ Grip the carrier disc by the recessed
grips and lift out of the bowl.
■ Turn the carrier disc over and carefully
press out the insert from the underside
(Fig. G).
or
Disassembling dicer:
(Bild I)
■ Turn the dicer clockwise and remove
from the lid.
■ Undo catches and remove cutter disc.
■ Remove remnants from the cutting grid
using the cutting grid cleaner. Rotate
cleaner head to the corresponding
cutting grid size.
■ Take cutting grid out of the base holder.
Cleaning
Warning!
Never immerse the lid of the multi-function
accessory in water and do not clean under
flowing water or in the dishwasher. Do not
clean dicer parts in the dishwasher, blades
will become blunt.
■ Wipe lid of the multi-function accessory
with a damp cloth only.
■ Bowl, universal blade, carrier disc and
disc inserts are dishwasher-proof.
■ Do not wedge plastic parts in the dish-
washer as they could warp.
■ Prerinse all dicer parts under running
water. Clean parts with a brush.
If processing e.g. red cabbage or carrots,
the plastic parts will become discoloured by
a red film which can be removed with a few
drops of cooking oil.