Preparing For Use; Connect To A Therapy Device; Connect To An Oxygen System - Weinmann VENTI-O2 Descripción Del Aparato Y Manual De Instrucciones

4. Preparing for use

4.1 Connect to a therapy device

Set up your therapy device as described in the associated instructions for use, but
without fitting the tube system. Then assemble the VENTI-O

4.2 Connect to an oxygen system

For connecting to the oxygen system you need an oxygen tube with an internal
diameter of 4 mm. To ensure proper functioning of the VENTI-O
not be longer than 20 m.
Connect to an oxygen concentrator
10
EN
Preparing for use
1. Plug the VENTI-O
device. Make sure you hear it click into place.
2. Fit the adapter for the tube system supplied with
the VENTI-O
2
3. Fit the O supply tube onto the O
2
VENTI-O .
2
1. Set up your oxygen concentrator as described in
the relevant instructions for use. Do not switch on
the concentrator yet.
2. Fit the O tube of your concentrator onto the O
2
inlet ( ) of the VENTI-O
as follows:
2
into the side of the therapy
2
into the device outlet.
, the tube should
2
.
2
outlet ( ) of the
2
2