2. Description
2.1 Intended use
You can use the VENTI-O
mask during BiLevel ventilation. The VENTI-O
oxygen concentrator, an oxygen cylinder with pressure reducer, a continuous-flow
liquid oxygen system or a central gas system. The oxygen system must possess a flow
control that is independent of the VENTI-O
Warning!
•
The VENTI-O
from an undetected failure of the oxygen supply, as the VENTI-O
– like the therapy device – does not have an alarm drawing
attention to oxygen supply problems.
Always use the device only for the purpose described here.
2.2 Function
The VENTI-O
clicks into place on the side of the therapy device. It is controlled and
2
supplied with power by the therapy device. If the therapy device and the oxygen
supply are switched on and working properly, the VENTI-O
supplying oxygen. The green status indicator of the VENTI-O
If the therapy device is switched off, or if a fault occurs (e.g. power failure), the
VENTI-O
stops supplying oxygen to the breathing mask. The green status indicator
2
goes out. The oxygen is released into the surrounding air to prevent accumulation of
O
in the device.
2
6
EN
Description
to supply up to 4 l/min oxygen (O
2
must only be used for patients who are not at risk
2
may be used in conjunction with an
2
.
2
) into the breathing
2
2
automatically starts
2
lights up.
2