Changing Settings Using Teranex Mini Smart Panel - Blackmagic Design Teranex Mini Manual De Instalación Y Funcionamiento

The configure and about tabs in Blackmagic Teranex Setup
are common across all Teranex Mini models.
Configure Tab
The 'configure' tab is the same for all Teranex Minis and
contains your converter's network settings. Here you can
toggle your converter between dynamic and static network
addresses, as well as set up the IP address, subnet mask,
and gateway for your Teranex Mini. See the 'changing
network settings' section for more detail.
Use the 'configure' tab in Blackmagic Teranex Setup
to access network settings.

Changing Settings using Teranex Mini Smart Panel

You can also change settings using the optional Teranex
Mini Smart Panel. This control panel mounts to the front of
your Teranex Mini and replaces the original blank front
panel that shipped with the converter. You get fast access
to your settings using buttons and a rotary knob and you
can see the input on the built in LCD.
The converter's USB port is still accessible with the Teranex
Smart Panel attached. To access the port, simply open the
You can quickly check your settings and set new ones using an optional Teranex Mini Smart Panel.
1 MENU
2 VIDEO
SET AUDIO
The Smart Panel easily mounts to the front of your Teranex Mini converter.
About Tab
You can use the settings in this tab to name your Teranex
Mini, and to identify individual converters. To name your
Teranex Mini converter, simply click in the 'name' text box
and type your desired converter name. Click 'save' to
confirm the change. To easily identify your selected Teranex
Mini converter, click on the 'identify' checkbox. This will
flash the multi use indicator on your converter's basic
Teranex Mini panel. If you have a Teranex Mini Smart Panel
installed, you will see the model name in the LCD turn from
grey to red. Deselect the checkbox to turn off the
identification indicators.
The 'software settings' menu in the 'about' tab identifies
which software version your Teranex Mini is running. If your
converter's internal software is older than the current
version that comes with Blackmagic Teranex Setup, an
update button will be present here that allows you to bring
your converter's software up to date.
The 'about' tab in Blackmagic Teranex Setup is used to
name and identify your Teranex Mini. You can also check
the version of the setup software.
plastic cover. With the Teranex Smart Panel installed, the
front panel small switches are covered up and no longer
used and this is because all the switch settings and more
are now in the menu on the Teranex Smart Panel and can
be set using the LCD. The settings available will vary
between Teranex Mini converters because the features
are different between models, but navigation layout on
screen is the same, so its easy to move between models
to make changes to settings.
2160p59.94 SDI to Analog 12G
01:23:47:08
10