Teranex Mini - Sdi To Hdmi 12G - Blackmagic Design Teranex Mini Manual De Instalación Y Funcionamiento

Teranex Mini - SDI to HDMI 12G

Connect a huge range of HDMI displays and video
projectors to SDI based equipment. Your Teranex Mini SDI
to HDMI 12G provides automatic switching between SD
SDI, HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI input sources
and converts to HDMI with embedded audio, plus balanced
1 2
Connectors
1. Mini-B USB port
Connects to the Blackmagic Teranex Setup software via
a Mac OS X or Windows computer for adjusting settings
and updating your Teranex Mini's internal software.
2. Switches
Adjustable switches for changing settings.
3. LED Multi-Use Indicator
Glows white when the converter is receiving power and
green when a valid video input signal is detected. Will flash
on/off to identify individual converters via Blackmagic
Teranex Setup.
4. Power
Standard built in IEC C14 connector for 90 - 240 volt AC
power supply.
5. HDMI
HDMI video output.
AES/EBU or analog audio out. The 'R analog' XLR connector
can also be set to output timecode. If an HD monitor or TV
is connected to the HDMI output, any Ultra HD source is
automatically down converted to HD.
4
ETHERNET PoE+
3 6
6. Ethernet PoE+
Connects to a network switch or computer so you can
change settings using the Teranex setup utility. The Ethernet
port also supports power over Ethernet plus.
7. SDI In
SDI video input BNC connector.
8. SDI Loop Out
SDI video loop output BNC connector.
9. L - Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU
audio output XLR connector.
10. R - Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU
audio output XLR connector. Can also be configured for
timecode output.
12
5
HDMI OUT
L - ANALOG R - ANALOG
SDI LOOP OUT
SDI IN AES/EBU AES/EBU - T/C
7 8 9 10