Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 41
PadPak PPC5
Clean the converter on the inside by removing any large
paper pieces by hand and subsequently cleaning it with a
vacuum-cleaner (first pull the plug from the wall socket; it
is recommended to wear hand protection).
If the converter is cleaned by someone other than the
operator of the converter (e.g. a cleaning department or
external cleaning company), these persons must have
the correct instructions to safely carry out the cleaning
activities
3.9

Maintenance

Before performing maintenance on the converter, the
electrical supply must be turned off by pulling the power
plug from the wall socket.
Pay attention to sharp edges, corners
and knives of the converter due to the
risk of cutting.
Warning!
Do not operate the converter when
the safety
removed.
Warning!
Maintenance of the converter should be performed at least
once a week:
· Open the front cover of the converter.
· Remove paper scraps.
· Wipe with a dry, damp cloth to remove excess paper
dust.
· Close the front cover.
At least once a year or when the
converter needs to be inspected by a qualified person.
The following points need to be checked:
· Various converter adjustments
· Operation of the safety provisions
· Legibility of the warning stickers
· Wear and tear of parts
· Clean cutting area
· Quality of the "pad".
3.9.1 Repair / Replacing Parts
Repairs can only be carried out by a qualified service
technician.
· Only Ranpak supplied parts are permitted for use as
replacement parts.
· Parts can be ordered by a Ranpak distributor.
· Deviating from the instructions above can affect the
safety of the converter. The manufacturer cannot
accept liability for such deviations
PadPak PPC5 Operator Manual - EN
devices
are switched off or
lamp lights up, the
EN
6

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Ranpak PadPak SR PPC5

Tabla de contenido