Intended Use - Forch 5350 9021 Manual De Instrucciones

There are also pictograms, signs and labels on the device which have to be adhered to and kept
in useable condition.
1. General
- The device has been built according to applicable and recognised rules of technology, and
has been deemed failsafe at the point of its development. There may still be, however, dangers
when using the device if it is used by staff which has not been trained properly or if the device
has been used improperly or not according to its intended use. Any person who is charged with
work on or with the device, therefore, has to read and understand the operating instructions
prior to starting work.
- Changes of any kind as well as alterations or additions to the device are not allowed.
- All safety, warning and operating information on the device has to be kept readable at all times.
Damaged signs or stickers have to be replaced immediately.
- It is imperative to adhere to the indicated settings or ranges.
2. Responsibility of operator
- Always keep operating instructions close to the device.
- Only operate device when it is in an impeccable and safe condition.
- Keep safety devices easily accessible and check on a regular basis.
- Please adhere to the generally applicable safety, accident prevention and environmental
regulations in addition to the work safety information given in the operating instructions for
the device's area of use.

3. Intended use

The operational safety is only guaranteed if the device is used in accordance with information
given in the operating instructions. Please adhere to the generally applicable safety, accident
prevention and environmental regulations in addition to the work safety information given in the
operating instructions for the device's area of use. Use and maintenance has to be always car-
ried out in accordance with the applicable local regional or national guidelines.
- The ratchet wrench is a handy, compressed air operated tool for manual use.
- Ideal for use on cars, motorbikes, agricultural machinery or assembly conveyors at hard-
to-reach places.
- The ergonomically formed handle which is insulated against cold, and the drive located on the
side, ensure ease of use even where space is at a premium.
Once the maximum torque has been reached, no further tightening is required by hand
with the ratchet wrench.
- The exhaust hair is released downwards from the handle.
- The compressed air connection is made via a quick coupling.
- There is a grave danger to bodily, health and property damage when using the FÖRCH
pneumatic ratchet wrench improperly or if not using it according to the applicable safety
instructions.
- Any use which goes beyond the intended use and/or any different use of the tool is not
allowed and is considered as using the tool not as intended.
- Demands of any kind against the manufacturer and/or representatives resulting from damages
due to improper use of the tool are explicitly excluded. - The operator is liable for damages
resulting from improper use.
4. Safekeeping / storage
The unit has to be kept safe and stored in conditions as follows:
- Store in a dry and dust free place.
- Do not expose the device to any liquids and/or aggressive substances.
- Do not store outside.
- Keep the device out of reach of children.
- Storage temperature - 10°C to + 40°C
- Relative humidity max. 60 %.