SCHUBERTH M1PRO Manual De Instrucciones página 53

3. Remove the cheek pads step-by-step by
loosening the pins from the helmet shell
and neck band.
INSTALLATION INNER LINING
1. Pull the insertion grommets on the neck
band over the pin on the cheek cushion.
Using the pins, button the cheek pads onto
the insertion mechanism in the helmet shell.
2. Hook the hook-shaped ends of
the neck tabs behind the front screws.
Then click the insertion mechanism on
the neck tabs into the pins between
the outer and inner shells of the
helmet.
EN
51