Kit Assembly - Metra 99-7611 Instrucciones De Instalación

ISO DIN radio provision
with pocket
1. Snap the radio housing brackets to
the radio housing. (Figure A)
2. Slide the radio into the radio
opening (from behind) and secure
with the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
4. Reassemble dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-7611
Double DIN radio provision
1. Mount the radio housing brackets
to the sides of the double DIN radio
using screws supplied with the
double DIN radio. (Figure A)
2. Place the double DIN trim plate on
the front of the double DIN radio.
(Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
4. Reassemble dash in reverse
order of disassembly.
3
(Figure A)
(Figure B)