Impecca IPAC08-CR Manual De Usuario página 11

AIR EXHAUST PORT MOUNTING
If you have an existing air exhaust port, you can directly connect your portable air condi-
tioning unit to the port. For the best energy efficiency and to preserve the longest life of
your unit, avoid bending the hose and keep the exhaust hose length as short as possible.
The hose bending point should be at least 24" away from the unit for optimal perfor-
mance. Avoid any kinks or sharp bends.
CONNECTING THE AIR EXHAUST DUCT
1
Step 2: Ensure the side marked TOP on connector A is facing upwards. Slide connector A
into the rails (#1) found at the rear of the air conditioner unit and press firmly until you
hear a slight click from the clasp (#2).
3
2
2
1
Step 1: First completely expand about 5 inch-
es of hose on both ends of the exhaust pipe.
Insert and fasten connector A (#1) to the ex-
haust pipe (#2) by turning the connector
clockwise at one end of the hose. Repeat the
process at the opposite end of the hose with
connector B (#3).
–9–