Installing Your Unit - Impecca IPAC08-CR Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING YOUR UNIT

STEP 1: IDENTIFY INSTALLATION LOCATION
1. Following the steps in the pre-installation section, identify a proper installation location.
STEP 2: INSTALLATION OF THE AIR EXHAUST DUCT
1. Remove the exhaust hose and all connectors.
STEP 3: WINDOW KIT INSTALLATION
The window kit is designed for installation in most vertical or horizontal sash windows.
You may be required to slightly modify your specific installation to ensure safe and proper
use of your air conditioner unit.
Horizontal window:
Minimum width: 27.5" (70cm)
Maximum width: 48" (122cm)
1. Adapt window frame size
Insert the window exhaust port fitting (#1) into your window and extend the width or
height to fill your window entirely using the adjustment plate (#2).
If the inner width of the window is less than 28", you may need to cut the frame to adjust
the width. Cut on the OPPOSITE side (#3) side of the opening, as indicated below.
2
2. Insert connector C (#2) into the window frame (#1)
Vertical window:
Minimum height: 27.5" (70cm)
Maximum height: 48" (122cm)
1
1
2
–7–
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ipac-10cr

Tabla de contenido