USING THE REMOTE CONTROL
ON/OFF BUTTON
Press the ON/OFF button to turn the unit on or off.
MODE BUTTON
Cycle between cooling mode, dehumidifier mode, and fan mode.
TEMPERATURE +/- BUTTONS
Set the desired room temperature by pressing the appropriate button. Temperature
changes are displayed in 1° increments in the range of 61°F (16°C) and 86°F (30°C)
Note: Temperature cannot be set when using the fan or dehumidifier modes
FAN BUTTON
Cycle through different fan speeds between Auto, Low, Medium, and High speed. Auto
speed selects an appropriate fan speed based on ambient temperature and most effi-
cient unit operation.
SWING BUTTON
Not applicable for this model.
SLEEP BUTTON
During cooling mode, the sleep button will allow the room temperature to slightly in-
crease for more energy efficient operation.
TIMER BUTTON
•
When the unit is running, press this button to program a time when the unit will
automatically turn off. While the T-OFF and H icons are flashing on the remote
control display, use the +/- buttons to determine the time the unit will shut down
in 30 minute (.5h) increments. Press the Timer button again to confirm the shut
down command.
•
When the unit is powered on but not running, press this button to program a time
when the unit will automatically turn on. While the T-ON and H icons are flashing
on the remote control display, use the +/- buttons to determine the time the unit
will start up in 30 minute (.5h) increments. Press the Timer button again to confirm
the power on command.
•
To cancel a timer, press the timer button to see remaining time before the timer
activates. Press the timer button again to cancel the timer.
Note: Timers can be set between the range of 30 minutes (.5h) and 24 hours. The unit must
remain plugged in for the timer to function properly.
–5–