Horizon Global 76439 Instrucciones De Instalación página 5

Remove existing M8 bolts from exhaust hanger bracket. Install
exhaust bracket (item 6) on frame rail using existing M8 bolts.
Use M8-1.25 bolts to install exhaust hanger bracket to exhaust
bracket.
Align hitch into position over existing weldnuts as shown and
install fasteners to bottom of frame rails. Note: Existing fascia
tab should be reinstalled between frame rail and bracket.
©2021 Horizon Global™ Corp - Printed in Mexico
Be careful not to pinch hoses on the outside of the passenger
side frame rail or scratch fascia. Remove excess caulking from
rails if needed.
Tighten all M12 x 1.25 CL8.8 fasteners with torque wrench to 76
Lb.-Ft. (103 N*M) Tighten all M8 x 1.25 CL8.8 fasteners to 20
Lb.-Ft. (27 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
Sheet 5 of 18 76364NP 3-8-21 Rev. A