Zeiss Axioscope 5 Guia Rápido página 20

ZEISS
9.4 Functions of stands keys and display elements
For the location of the keys and display elements at your stand, refer to sections 9.1 to 9.3.
Availability
Key
Main switch
I/O (see Yes
Fig. 1/30)
Permanent/
ECO switch Yes
(see Fig. 1/16)
Indicator light
(see Fig. 1/12 Yes
and 15)
RL/TL button
(see Fig. 1/13 Yes
and 14)
Intensity/
LM knob Yes
(see Fig. 1/10)
Left Snap
button (see
Fig. 1/20)
No
(if ZEISS
Axiocam
attached)
18
ESSENTIAL OPERATION CONTROLS
Action
Yes Yes I = on; O = off
Yes Yes Switch:
Yes Yes Blinking ***:
Option No Short press *:
Turn:
Short press *:
Long press **:
Yes Yes
Long press for
20 s:
Short press *:
Yes No
Long press **:
430035-7014-111
Functionality/Description
Switches the microscope on/off
Switches between Permanent (continuous) mode
and ECO mode of the microscope illumination:
- Permanent mode active: illumination is
continuously switched on.
- ECO mode active: illumination switches off
after 15 minutes without action.
Indicates microscope function (normal/setting)
Switches RL/TL illumination alternately on/off. The
respective indicator light is continuously illuminated.
Second press to the RL/TL button to turn off/on the
illumination (the indicator light not affected).
Controls the light intensity of the active light source
Repeated short pressing switches a single LED or all
LEDs of the fluorensence light source together on or
off.
Saves the set light intensity. During this action, the
indicator light blinks twice in
background appears BLACK for 300 ms (this does
not apply to halogen illumination).
Activates the factory default settings (enables Light
Manager, sets light intensity to the initial value,
clears all saved parfocal positions).
The indicator light starts blinking in
until 20 s is reached. After 20 s, the indicator light
blinks in GREEN. Then release the knob. The
indicator light turns to GREEN
system reset is done.
After factory default reset, re-power the system.
Snaps an image; when the snap is completed, the
monitor display turns BLACK for 50 ms.
Starts video recording; another short press is
required to stop recording. When recording is
finished, the monitor display turns BLACK for
300 ms.
Axioscope 5/7/Vario
GREEN and the image
RED after 3 s
permanently if the
07/2018