Zeiss Axioscope 5 Guia Rápido página 21

Axioscope 5/7/Vario
Availability
Key
Right Snap
button (see
Fig. 1/20)
Yes
(if ZEISS
Axiocam
attached)
Snap button +
Intensity/LM
Yes
knob (see
Fig. 2/20+10)
Stage control
button on the
Yes
left
(see Fig. 2/28)
Right snap
button + Stage
control button Yes
on left (see
Fig. 2/20+28)
* Short presss: hold less than 1 second then release.
** Long press: hold at least 1.5 seconds.
*** BLINK: the indicator light alternately turns on/off at 500 ms intervals.
07/2018
ESSENTIAL OPERATION CONTROLS
Action
Short press:
Yes Yes
Long press **:
Yes Yes Long press **:
Short press *:
No No
Long press **:
Press
simultaneously
No No
Press
simultaneously
again
430035-7014-111
Functionality/Description
Snaps an image; when the snap is completed, the
monitor display turns BLACK for 50 ms.
Starts video recording; another short press is
required to stop recording. When recording is
finished, the monitor display turns BLACK for
300 ms.
Enables/disables the Light Manager:
- Disabling: The indicator light blinks
GREEN / ORANGE / GREEN
- Enabling: The indicator light blinks
GREEN / GREEN / GREEN in sequences.
Switches between XY stage control and
Z axis control via focus drives
If Z axis control is active:
- the indicator light lights GREEN
- the left and right fine focusing drive knobs are
controlled for slow Z-movement (focusing)
- the left and right coarse focus drive knobs are
controlled for fast Z-movement (focusing)
If XY stage control is active:
- the indicator light blinks GREEN
- the left focus drive knobs (fine or coarse)
control Y movement (slow or fast) of
the stage
- the right focus drive knobs (fine or coarse)
control X movement (slow or fast) of
the stage
Records the parfocal position.
1. the LED shuts off for 300 ms (darkness
indicates action to user)
For halogen illumination: Do NOT shut off
the light.
2. the indicator light blinks twice in
Load/unload
Load/unload
ZEISS
in sequences.
permanently
GREEN
19