Install Cooking Appliance; Attach Endcaps To Downdraft - Bosch HDD80050UC Instrucciones De Instalación

INSTALLATION

Install cooking appliance

Align the cooking appliance with downdraft and fasten
appliance in place following appliance instructions.
NOTE: Accurate alignment of cooking appliance and
downdraft is necessary to ensure that there is no
interference when air vent is raised and lowered. There
should be a gap of 1/32" - 1/16" (0.79mm - 1.59mm)
between the back of the cooktop and the front of the
downdraft cover.
English 20

Attach endcaps to downdraft

1. Remove backing from tape.
2. Clean end cap covers (inside) with Rubbing Alcohol or
Isopropyl Alcohol.
3. Press end cap covers over brackets.
4. Check the operation of the downdraft.