ResMed S8 Elite Manual Clínico página 48

338210r3 Eng.book Page 42 Monday, July 11, 2005 1:28 PM
To attach an S8 adapter to an S8 device:
1. Unplug the device from the wall.
2. Remove the module currently attached to the S8 device (I-1).
3. Press and hold down the button on the adapter (I-2 a), while pushing it onto the
device.
4. Connect one end of the cable to the adapter, and the other end to the computer.
R
EMOVING AN
To remove the S8 adapter:
Note: The device should be turned off when removing an adapter and attaching a
module.
1. Press and hold down the button on the adapter (I-3 a), while pulling it off the S8
device.
2. Attach another module to the S8 device according to the instructions for that
module.
See the manual for your PC application for information about downloading data to
your computer.
42
S8
ADAPTER