BQS BB FIX 012 Manual De Uso página 20

2. VEHICLE INSTALLATION POINTS
WHERE:
In the vehicle rear seats.
Please, do NOT install the safety seat in forward seats
except for the following cases:
1. Whenever the vehicle does not count with rear seats.
2. When all rear seats are already occupied by children exceeding 135 cm height.
3. When it is not possible to install all child restraints systems in the rear seats.
*Note: According to Spanish legislation for child restraint systems (Royal Decree 667/2015).
HOW:
GROUP 0+ / Install rearward facing.
GROUP 1 / Install forward facing.
GROUP 2 / Install forward facing.
NOTICE:
The child seat must only be used in this seat IF it has a lap and
diagonal belt (3 points).
3. INSTALLING THE CAR SEAT. GROUP 0+
NOTICE
1. Check the seat is ready to be installed rearward facing (Group 0+) as
shown in fig. 3.3. For this, recline the seat fully. Pull the lever
and adjust the angle of recline to position 4 without releasing the lever.
If it is necessary swivel the seat 180º to place the seat in the opposite
direction of travel (fig. 3.2). Release the lever when the seat is in the
desired position.
2. Locate the Isoclick Fix® arms
3. Place the seat in the back seat of the vehicle in the opposite direction
of travel.
4. Hold the safety seat with both hands and insert the two Isoclick Fix® arms
(N) firmly into the vehicle´s isofix anchoring points until they fasten with a click
on both sides. The red button will change to green on both sides (fig. 3.4).
5. Shake the seat to check that it is correctly anchored to the vehicle's
20
GROUP 0+ only. 0 to 12 months approx. (0-13 Kg)
(N) in the base of the seat (fig. 3.3).
1
2
forward
(G)
BB FIX 012