General Overview - BQS BB FIX 012 Manual De Uso

13. Do not leave heavy objects inside the car, as these may injure the child in the
event of an accident.
14. Make sure that the buckle is correctly fastened so that the child can be
quickly freed in case of emergency.
15.The safety seat's rigid and plastic elements should be positioned and
installed so that they cannot be trapped by a moving seat or a door during
everyday use of the vehicle.
16. Do not disassemble, modify, or add any piece to the child seat or harness, as
this would seriously affect its basic functioning and the safety that the child
seat provides.
17. The safety seat must remain installed in the vehicle with the safety belt,
even if the child is not seated in the child seat. The child must never be left
unattended while seated in the safety seat, not even outside the vehicle.
18. Keep the safety seat away from corrosive products.
19. Do not use anchor points that are not listed in the instruction manual and
indicated on the seat.
20.The seat should be replaced after undergoing the violent stresses associated
with an accident.
21. The manufacturer guarantees the quality of its products, but not the quality of
second-hand products or products belonging to other companies.
22. Instruction illustrations are for informational purposes only. The child restraint
system may contain small differences compared to the photographs or
images in the instruction manual. These variations do not affect its
certification under ECE Regulation R44/04.

1. GENERAL OVERVIEW

A. Headrest.
B. Harness straps.
C. Shoulder pads.
D. Belt buckle.
E. Harness adjustment button.
F. Harness adjustment strap.
G. Reclining lever.
H. Reductor cushion.
I. Harness straps connector.
J. SIP (Side impact protection).
K. Installation slots (group 0+/1).
L. Headrest height regulator.
M. Installation slot group 2.
N. Isoclick Fix® connectors.
O. Shoulder pad straps connector.
P. Locking ring.
Q. Anchoring Stem.
www.babyqs.com
19