Blender - Silvercrest SKM 500 B2 Instrucciones De Uso

6) Slide the pusher
7) Insert the plug into the mains power socket.

Blender

NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Place the blender onto the motor block
arrow
2) Turn the blender until the arrow
3) Fit the lid
the handle of the blender
the side next to the handle towards which the guide at the handle opens.
Rotate the lid
gages in the guide at the handle of the blender
a little way to ensure that the locking mechanism has engaged in the slot.
Fig. 3
4) Fit the blender closure
slide into the guides in the lid
it is firmly attached.
5) Insert the plug into the mains power socket.
SKM 500 B2
into the filling shaft
on the holder with mixing knife
to the blender so that the lip of the lid
(Fig. 3). Ensure that the lip is positioned exactly at
clockwise so that the locking mechanism on the lid
Fig. 4
to the lid
. Then rotate the closure
.
in a central position so that the
is pointing at the symbol
is pointing at the symbol
is exactly in line with
(Fig. 4). Press the lip down
of the blender so that the plastic tabs
GB │ MT
.
.
en-
by 90°, so that
│ 113 ■