Assembly; Temperature Switch - Parker Controller Family Manual De Uso

.

Assembly

.1

Temperature switch

Installation (mechanical):
The temperature switch should be assembled and disassembled
only in a pressure-less condition. Secure the temperature sensor
to the corresponding process connection. Installation should be
carried out on the flat nut surface exclusively. The housing can
be rotated to ensure that the digital display is optimally visible.
The housing can be secured with:
• thread-cutting screws placed through the two blind holes located at the
rear of the housing,
• a fixing clip.
An outlet tube should be used to protect against aggressive sub-
stances or high pressure (refer to data sheet).
Installation (electrical):
Protect the temperature switch from electromagnetic sources
and overvoltage.
68