Honeywell Miller MIGHTEVAC Instrucciones Para El Usuario página 12

Fig. 8b
Add 3 ft (.9m) of fall clearance
to calculation if user may
be working in a crouched or
kneeling position.
Add 5 ft. (1.5m) of fall clearance
if user may be working in a lying
down position.
Worker must not be exposed
to a swing fall hazard.
12
Fig. 8d
Fig. 8c
Whenever a worker may not be working directly
under the anchor point or may be moving back
and forth from the vertical of the unit, the swing
fall factor must be included in the fall clearance
calculation. Fall clearance distance will increase
according to the specifi cs of the swing fall
conditions.
Honeywell Technical Services can help you
calculate the added fall clearance required.
If there is any question
about calculating fall clearance distance,
please contact Honeywell Technical Services:
IS.PPE.TECHSUPPORT.EUROPE@honeywell.com
www.honeywellsafety.com