Matrix ENDURANCE STEPPER Manual Del Usuario página 5

ASSEMBLY
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level flat surface. It is recommended that you place a protective
covering on your floor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and
bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly
and usage. Please do not wipe this off. If you have difficulty,
a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that special
attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If
the assembly instructions are not followed correctly, the equipment could
have parts that are not tightened and will seem loose and may cause
irritating noises. To prevent damage to the equipment, the assembly
instructions must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer
Tech Support. Contact information is located on the information card.
ENGLISH
TOOLS REQUIRED:
F 6mm Allen Wrench
F 5mm Allen Wrench
F Phillips Screwdriver
PARTS INCLUDED:
F 1 Main Frame
F 1 Stabilzer Tube
F 1 Stabilizer Tube Cover
F 1 Console Mast
F 1 Console Mast Cover
F 1 Console Mast Bracket
F 2 Upper Handlebars
F 2 Lower Handlebars
F 1 Pulse Grip Handlbar
F 1 Handlbar Joint Connector
F 1 Bottle Holder
F 1 Power Cord
F 1 Hardware Kit
Console sold separately
5