MC-5451330-Bedien-0909.qxd
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Use and treatment of the battery-
operated tool
a Only use chargers to recharge
the battery that have been
recommended by the manufacturer.
When using a charger designated for a
particular type of battery, there is a risk
of fire if it is used with other batteries.
b Only use the batteries designed for
use in the electric tools. The use of
other batteries may lead to injury and
risk of fire.
c When not in use, keep the battery
away from paper clips, coins, keys,
nails, screws or other small metallic
objects that may bridge the contacts.
A short-circuit between the battery
contacts can lead to burns or fire.
d Fluid can escape from the battery
when used incorrectly. Avoid all
60
11.09.2009 16:34 Uhr
6 General safety information for
Service
a Have your power tool serviced by a
7 Safety information for battery-
a Hold the tool by the insulated
8 Safety notes for battery/charger
a Keep the charger away from rain or
b Only use chargers recommended
c Never use to recharge third-party
Seite 60
contact with this. In the event of
accidental contact, rinse with water. If
liquid should get into the eyes, get
medical assistance. Battery fluid may
result in skin irritations and burns.
battery-powered screwdrivers
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
powered screwdrivers
handle surfaces only when carrying
out tasks during which is it
possible that the tools will come
across hidden power cables or its
own cable. Contact with a power-
carrying cable can also put metal
parts of the unit under power and
cause an electric shock.
damp. Water entering into the
charger will increase the risk of an
electrical shock.
by the manufacturer to recharge
the battery. When using a charger
designated for a particular type of
battery, there is a risk of fire if it is
used with other batteries.
batteries. The charger is only
designed to charge the supplied