Descargar Imprimir esta página

Safety Instructions; Relating Specifically To - MeisterCraft MAS 180-22D Traducción De Las Instrucciones De Servicio Originales

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36
MC-5451330-Bedien-0909.qxd
batteries using the voltages specified
in the Technical Data. Otherwise there
is a risk of fire or explosion.
d Keep the charger clean.
Contamination will increase the risk of
an electrical shock.
e Check the charger, cable and plug
each time you use the unit. Do not
use the charger if you find any
damages. Never open the charger
up yourself, have it repaired by a
qualified specialist only and with
original replacement parts. A
damaged charger, cable or plug will
increase the risk of an electrical shock.
f Never operate the charger on a
surface that will burn easily (for
example, paper, textiles etc) or in a
flammable environment. There is a
risk of fire occurring as a result of the
heat generated during the charging
process.
g Fluid can escape from the battery
when used incorrectly. Avoid all
contact with this. In the event of
accidental contact, rinse with
water. If liquid should get into the
eyes, get medical assistance.
Battery fluid may result in skin
irritations and burns.
h Do not open the battery. There is a
risk of short-circuiting.
i Protect the battery from heat, for
example, from constant sun and
fire. There is a risk of explosion.
j Never short circuit the battery.
There is a risk of explosion.
k In the event of damages and
incorrect use, vapours may come
11.09.2009 16:34 Uhr
out of the battery. Ensure plenty of
fresh air and, if you have any
symptoms, consult a doctor. These
vapours may irritate the respiratory
system.
6 – Safety instructions
• Use the appliance, the charger and the
attachments, only for their intended
applications!
• Before laying the stick screwdriver
aside, ensure that all moving parts
have come to a standstill.
• Avoid frequent blocking when drilling,
tightening or loosening screws.
• Connect the charger only to a
200–240 V AC power supply.
• Charge the screwdriver battery only
with the charger supplied.
• Protect the charger and the
screwdriver from contact with
moisture. Never immerse in water!
• Do not use the charger in the open air.
• To avoid damage to the batteries,
never expose them to temperatures of
over 50 °C.
• When charging, ensure that the
device is correctly connected („+/–").
• Do not attempt to burn the battery.
Seite 61

relating specifically to

the equipment
CAUTION! Do not short-circuit the
contacts of the battery or charger.
61

Publicidad

loading

Este manual también es adecuado para:

5451330