How To Change The Battery - MiLAN 40925GR Manual Del Usuario

HOW TO CHANGE THE BATTERY

1. This machine is equipped with two power sources.
a) Solar energy b) Battery (1.5V)
2. When the display becomes blurred, this indicates
that the battery power is nearly gone.
You can Use solar energy for power or replace the battery
to make the display clear again.
(1) Loose the screw from the back cover and carefully
remove it.
(2) Use a screwdriver or an adequate tool to push
aout the battery (Note: follow the exit direction in
pushing out).
*Do not damage the circuit.
exit
(Fig. 1)
(3) Push in the new battery in the opposite direction.
(Please note that the + polarity should face up).
(4) Put the cover back and tighten the screw (do not
overdo)
(5) Auto power-off: After approximately 8 minutes.
17