Tabla de contenido
Publicidad
Installation
Installation
A
B
A Installation:
All installation must be carried out by a competent person or qualified electrician. Before connecting the mains
supply ensure that the mains voltage corresponds to the voltage on the rating plate.
Direct Connection
This appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum
opening of 3mm between contacts.
The installer must ensure that the correct electrical connection has been made and that it complies with the
wiring diagram.
The cable must not be bent or compressed.
Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 5 core mains cable coloured as follows:
Brown and Black = L or Live
Blue and Grey = N or Neutral
Green and Yellow = E or Earth
N
(Blue/Grey)
L
(Brown/Black)
(Green/Yellow)
This appliance requires a 32 Amp Miniature Circuit Breaker.
To avoid the risks that are always present when you use an electrical appliance it is important that
this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse
and hazards. Please keep this instruction booklet for future reference and pass it on to any future
owners. After unpacking the appliance please check that it is not damaged. If in doubt, do not use the
appliance but contact Customer Services - see end of Care & maintenance section for details.
Instalacja
Instalare
C
E
Instalación
F
L
N
220-240V~
13
Publicidad
Tabla de contenido
