Using The Boost Function; Using The Timer - Cooke & Lewis CLIND60E Manual De Instrucciones

Ocultar thumbs Ver también para CLIND60E:
Tabla de contenido

Publicidad

Use
A
B
02
Safety mode (Child lock)
You can lock the controls to prevent unintended use by children.
When the controls are locked, all the controls except the OFF control are disabled.
To lock the controls
Touch the key (B)
To unlock the controls
1. Touch and hold key (B)
2. You can now start using your induction hob.
3. If you leave the hob locked and it switches off automatically, turn the hob back on using (C)
(B)
for 3 seconds.
WARNING: When the hob is in the lock mode, all the controls are disabled except OFF which can still be used in
an emergency.
03

Using the boost function

To activate
1. Select the cooking zone using (A).
2. Press the boost key (F)
To cancel
1. Select the cooking zone (A) that has boost engaged.
2. Touch the power slider control (D) to choose the new power level.
Note: Pressing the boost key
During boost operation power output will revert to level 9 after five minutes to avoid overheating.
04

Using the timer

You can set the timer from 1-99 minutes and this can be used in two ways:
1. As an alarm that does not alter any of the cooking zones.
2. As an automatic switch off function to turn off one cooking zone.
Note: This function only operates on one zone at a time;other active zones will continue to operate as normal.
Using the timer as an alarm
Note: You can use the timer function independently of the cooking zones.
1. Switch on the hob using (C).
2. Select the cooking zone using (A) and the power level required.
3. When the indicator stops flashing, touch the timer key (E)
4. Touch the "+" or "–" keys once to increase or decrease one minute at a time.
5. Or touch and hold the "+" or "–" keys to increase or decrease ten minutes at a time.
The timer will commence countdown and show the remaining time.
The timer will beep for 30 seconds once completed.
6. To cancel the alarm press
Using the timer to switch off a cooking zone
1. Select the cooking zone using (A) and select the power required.
2. Before the indicator stops flashing, touch the timer key (E)
3. Touch the "+" or "–" keys once to increase or decrease one minute at a time.
4. Or touch and hold the "+" or "–" keys to increase or decrease ten minutes at a time.
The timer will commence countdown and show the remaining time.
The timer will beep for 30 seconds once completed.
5. To cancel the timer, select cooking zone using (A), press
Note: The dot next to the selected timer controlled cooking zone will flash when the timer is operative for example
When using both timer functions together, the display will always display the time set for the alarm first. Touch the control
of the relevant cooking zone to see the remaining time before switch off is due to occur.
Utilisation
Użytkowanie
C
for 3 seconds when the hob is switched on and the display will show "Lo".
for 3 seconds to unlock.
. The zone indicator will show "P" and the power output increases to maximum.
again does not cancel this function.
then press "–" key until display shows "00".
Utilizare
Uso
E
F
and the timer will flash "10".
and the timer will flash "10".
then press "–" key until display shows "00".
and unlock using
23

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3663602494362

Tabla de contenido