Publicidad
Idiomas disponibles
Idiomas disponibles
Please read all instructions carefully before assembly, installation and/or use of this product.
3
ATTACH CENTER SECTION
• Place center section assembly onto the cargo basket lining up the four holes in center section with the holes in
the four mounting tabs on the cargo basket.
• Install four 7/16 hex bolts and lock nuts as shown.
• Tighten all 7/16-14 GR5 bolts to 55 ft•lb
4
BUMPER
SELECT SHANK ATTACHMENT HOLES
• Temporarily install the shank into your vehicles receiver hitch. Install ½" pin & clip to secure shank.
• Carefully line up the mounting holes in cargo basket with holes in shank.
• Select the appropriate holes in cargo basket so that the cargo basket is as close as possible to the bumper
without contacting it. Minimum 1" clearance is recommended.
Cequent Consumer Products Inc
Solon, OH 44139 USA
Cequent Help Hotline: 1-800-234-6992
Cargo Carrier
Product Name:
Product Code:
MOUNTING TAB
(4 PLACES)
SHANK
Page 2
59507
7/16 x 1.00" HEX BOLT
7/16 LOCK NUT
(4 PLACES)
CARGO BASKET
www.rolaproducts.com
59507N Rev B
11-21-07
Publicidad
