LawnMaster NPTBL31AB Manual Del Usuario página 29

MAINTENANCE
Outer electrode
0.026in. (0.65 mm)
■ Reinstall the spark plug cap into place.
NOTICE: Be careful not to cross-thread the spark plug. Cross-threading will seriously damage the
product.
ADJUSTING THE THROTTLE (See Figs. 35-36)
Run the blower at full throttle. If there is a gap between throttle turntable and throttle limit plate, the
throttle cable should be adjusted (Fig. 35).
■ Rotate the air filter knob counter clockwise and gently pull off the air filter cover.
■ Loosen the nut by turning it counter clockwise with the supplied spanner and pull the throttle cable
counter clockwise, then tighten the nut by turning it clockwise with the supplied spanner (Fig. 36).
■ Press down the throttle lever to the end. Inspect to ensure there is no gap between the throttle
turntable and the throttle limit plate. If there is still a gap, repeat step 2.
■ Turn the air filter knob clockwise to secure the air filter cover.
Fig. 33
Gap
29
Fig. 34
Throttle
Turntable
Throttle
Limit Plate
Fig. 35