Troubleshooting - LawnMaster NPTBL31AB Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

If your blower does not appear to operate properly, follow the instructions below. If this does
not solve the problem, please contact your local repair agent.
WARNING
Before proceeding, shut off the engine, wait for all moving parts to stop, and remove the battery
pack. Wait until the surfaces cool down. Failure to follow these instructions can result in serious
personal injury or property damage.
PROBLEM
The engine does not
start.
POSSIBLE CAUSE
The battery is not
secure.
No spark.
No fuel.
The engine is flooded.
The air filter is blocked.
SOLUTION
Insert the battery correctly. Ensure the battery is
fully charged.
Clean or replace the spark plug. Reset the
spark plug gap. Refer to the Spark Plug
Replacement section in this manual.
Check that there is sufficient fuel in the fuel
tank. Push the primer bulb until the bulb is
full of fuel. If the bulb does not fill, the primary
fuel delivery system is blocked. Contact an
authorized service dealer. If the primer bulb fills,
the engine may be flooded, proceed to the next
item.
Remove the spark plug referring to the Spark
Plug Replacement section in this manual. Press
the start button 5 to 10 times. Place the blower
to the side for 30 minutes with the spark plug
removed. After 30 minutes, replace the spark
plug referring to the Spark Plug Replacement
section. Then re-start the engine. If the engine
still does not start, contact an authorized service
dealer.
Clean the air filter. Refer to Cleaning the Air
Filter section in this manual.
33

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido