DNP DS-RX1 Guia De Inicio Rapido página 8

5. Repacking
Transporting the printer requires the reuse of the original packing materials. The printer must be packed in the same
way it was at the time of purchase. If the original packaging materials are not used and the printer is not packed
correctly, the printer may be broken during transport.
Remove all Accessories and Attachments from the printer (print media ink ribbon, paper roll and holders, USB cable,
power cable and paper tray) and store or transport them separately.
Please save the Print Head Protective Pad and do not throw away any packaging as you will need them to safely
transport the printer.
Place the sides marked TOP face up.
Match the printer orientation with the arrows.
Accessories box
Make sure to install for transportation.
Print Head Protective Pad is REQUIRED
for transportation.
Tapes
* When transporting, secure the front
cover with tape to prevent front opening
(Width 50 mm, length 200 mm or more)
Wrap the printer
in the sheet.
Match the printer orientation with the arrows.
* Place the attachments in the accessories box.
* When transporting be sure to include the accessories box.
Protective pad