Control Panel Layout; Daily Use; Activating And Deactivating; Optiheat Control (3 Step Residual Heat Indicator) - AEG ITE42600KB Manual De Instrucciones

4.3 Control panel layout

1 2 3
1
To activate and deactivate the
appliance.
2
To activate and deactivate Lock or
Child Safety Device.
3
To show the active zone.
4
CountUp Timer indicator.
5
Count Down Timer indicator.

5. DAILY USE

WARNING!
Refer to Safety chapters.

5.1 Activating and deactivating

Touch for 1 second to activate or
deactivate the appliance.
The control bars come on after you activate
the appliance and go off after you deactivate
the appliance.
5.2 Setting temperature
Always preheat the roasting
surface before cooking.
Each roasting zone has it own control bar.
To set or change the temperature:
Touch the control bar at the correct value or
move your finger along the control bar until
you reach the correct temperature.
The display blinks until the roasting zone
reaches the set temperature. Then a signal
4 5 6
To show the temperature and time.
6
7
To select Timer functions.
8
/ To increase or decrease the time.
9
To activate and deactivate Cleaning.
To set a temperature 0 - 220.
10
sounds and the display shows the
temperature.
5.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / As long as the
indicator is on, there is a risk of
burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
7 8 9
10
ENGLISH 65