Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
• Do not allow body contact, including your ngers and hands with a cutting disc while it is running to prevent
serious injury.
• Always secure the blade cover and safety cover to the cutting blade. Without the wheel cover and safety cover,
rotation of the cutting disc or fragments of the cutting disc can cause serious injury.
• Make sure the switch is o before connecting the power tool. Connecting tools when their switches are on would
result in unexpected bit rotation and serious injury.
• Always wear protective glasses at work.
always wear a dust mask, some residues such as dust caused by cutting the disc contain chemicals known to cause
cancer, birth defects or other diseases.
• Damage to the cable must be replaced or repaired immediately. Damage to the cable can cause electric shock.
Use only authorized cutting blades at all times.
• Use cutting discs with 4,000 RPM (revolutions per minute) allowable angular velocity. Using the cutting disc with
a peripheral speed lower than that allowed could damage them and fragments of the cutting disc could cause
injuries.
• Never use a broken or transformed cutting disc. Using broken or transformed cutting discs may in the future
cause damage to them while they are rotating, and fragments of the cutting disc may cause injury.
• Before changing the blade or brushes and making other adjustments to the cutting blade, always disconnect the
plug from its power source. Otherwise, you could experience electric shock or injury.
• Never use the saw blade with the cutting machine. The cutting machine has a higher speed and may damage the
blade and cause injury.
CAUTION
• Never subject the cutting disc to unnecessary pressure. This can damage the cutting disc while it is spinning and
fragments can cause serious injury.
• Never polish workpieces with the surface side of the cutting disc. The cutting disc is thin and weak on impact.
Ground workpieces with the surface side of the cutting blade can damage the blade while it is rotating, and
fragments of the cutting blade can cause injury.
• Always keep people away from your work area while you are operating the machine. Sparks or fragments of work
pieces that are generated when you operate them can cause serious injuries.
• Never use damaged parts to install a cutting disc such as threads, nuts, etc. Using damaged parts causes cracks or
other damage to the disc cut, which can cause injury or injury.
3
Publicidad
