Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
• Be sure to keep sparks from the disc away from your body and ammable materials. Sparks that come in contact
with ammable materials can cause re, or sparks that come in contact with the body can cause burns.
• Keep your workpiece secure with a bra. Unstable handling of work materials can damage them and cause injury.
• Always disconnect the plug from your power supply before replacing the cutting disc or brush.
Failing to do so can cause electric shock and serious injury.
CAUTION
• Always start the cutting operation after the motor speed has reached normal condition. Otherwise the motor will
overheat. If this occurs the workpiece that was cut will be rough due to the slow speed of the cutting disc.
• After replacing the cutting disc, never press down on the handle at this time. When squeezing the handle of a new
cutting disc, do not let the disc touch the oor. Otherwise the oor can be damaged.
• Never apply too much load on the cutting machine. Applying too much load to the cutting machine can damage
the blade and cause damage to the motor.
• Verify that the cutting disc is not loose or moving. If the cutting disc becomes loose or moves after it has been
replaced, it may be damaged when it starts operating. For this, stop the cutting operation immediately and check
that the disc and the important parts.
CHECK BEFORE USE
1. Switch
Verify that the switch is connected to the saw's power regulator before operation. When connected to the power
regulator without the switch this causes the operating mode to be below 15 mA of the nominal sensitivity range
and 0.1s of the operating time and the power returns to the tool electric current. For an easy ground pole use the
ground clip on the connection. When the ground pole is with the ground clip, be sure that the area between the
ground clip and another metal connection on the tool is charged with electrical current (Double insulated tool
does not require return for electrical current).
110V / 120VConnection
Conexión a 220V / 230V
4
Publicidad
