Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
6. Install the lock
This machine is equipped with a lock that prevents the cutting disc from being damaged by contact with the
ground and ensures operation.
INSTRUCTION AND OPERATION
1. Cut a workpiece
(1) Wait for the tool to nd its maximum speed before starting to cut.
(2) When the cutting disc is in contact with the workpiece, lower the handle slightly to cut it.
(3) After cutting, raise the handle to return it to its original position.
(4) After completing the operation, turn o the switch to stop the rotation of the cutting disc. Then prepare for the
next operation.
(5) Never remove the workpiece while the cutting disc is rotating.
Secure the workpiece rmly in the fastener to prevent it from moving.
2. On / O Switch
Push the button to turn on the switch and release it to turn it o . To improve continuous operation, press the switch
by pushing the button. To stop the operation, release the switch. When the switch is not released there may be a
fault with it.
Immediately turn o the machine to stop operation. Then replace the switch at the service center.
Press the green ON button and press the red OFF button.
10
Publicidad
