Assembly And Setting Up; Before FI Rst Use; Thermostat Settings; Operation - Silvercrest SKTG 2200 A1 Instrucciones De Uso

Assembly and setting up

WARNING! RISK OF FIRE!
► Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other fl ammable objects.
► Always place the appliance on a heat-resist-
ant surface.
1) Remove all of the parts from the box and
remove the packaging material and any
protective fi lm.
GB
MT
2) Clean all components as described in the sec-
tion "Cleaning and care". Ensure that all parts
are completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface. Ensure that you do not place
the appliance directly next to a wall or a
cupboard.
4) Push the fat drip tray 6 into the guide rails on
the underside of the appliance (see fold-out
page).
5) Insert the plug into a mains power socket.
Before fi rst use
1) Grease the griddles 2/3/4 lightly with
butter, margarine or oil which is suitable for
baking/grilling. This makes it easier to remove
any cooking residue on the griddles 2/3/4.
2) Set the thermostat 9 to level 3 and allow the
appliance to heat up for 5 minutes.
3) After 5 minutes, turn the thermostat 9 back to
level 0.
4) Then disconnect the plug and allow the appli-
ance to cool down.
36
NOTE
► The fi rst time the appliance heats up, a small
amount of smoke and smell may be gener-
ated due to production-related residues. This
is completely normal and is not dangerous.
Provide suffi cient ventilation by opening a
window, for example.
5) Wipe the griddles 2/3/4 with a moist cloth.
Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.

Thermostat settings

Level 0: Grill switched off
Level 0–2 Grill switched on;
low temperature
Level 2–3: Grill switched on; medium
temperature (e.g. vegetables)
Level 3–5: Grill switched on;
high temperature (e.g. meat)

Operation

WARNING! RISK OF INJURY!
► Once the appliance is in operation, touch it
only using the handles 5/8, the handle of
the contact grill lid 1 or the thermostat 9.
Risk of burning!
We recommend the use of oven gloves.
Once the fat drip tray 6 has been pushed in and
the mains plug has been connected to the power
supply:
1) Adjust the thermostat 9 to the desired temper-
ature level. The indicator lamp 0 illuminates.
When the set temperature has been reached,
the temperature indicator lamp 0 goes out.
SKTG 2200 A1