Help In Case Of Malfunctions - AL-KO BC 330 MT Manual Del Usuario

Ocultar thumbs Ver también para BC 330 MT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 84

Help in case of malfunctions

Engine unit attachment
MALFUNCTION
Engine does not start
Engine starts but does not keep
running
Engine starts but does not run at
full power.
Engine runs unsteadily
Excessive smoke
Polemounted pruner attachment
MALFUNCTION
No chain lubrication
Engine does not run
Hedge trimmer attachment
MALFUNCTION
Machine keeps cutting out
Engine starts but does not run at
full power
Blades get hot
If you encounter any malfunctions that are not listed in this table or which you cannot rectify yourself, please
contact our responsible customer service.
44
POSSIBLE CAUSE
Incorrect starting procedure
Incorrect lever position on the choke
Spark plug contaminated, incorrectly
set or incorrect plug
Contaminated fuel filter
Incorrect lever position on the choke
Contaminated air filter
Spark plug contaminated, incorrectly
set or incorrect plug
Incorrect fuel mixture
POSSIBLE CAUSE
Oil tank empty
Guide rail contaminated
Check the oil tank / fill with saw chain
oil
POSSIBLE CAUSE
On/off switch defective
Internal fault
Internal fault
Lack of lubrication
Blades blunt
Nicks in the blade
SOLUTION
Refer to the instructions for use
Set the lever to RUN
Clean/adjust or renew the spark plug
Renew the filter
Set the lever to RUN
Clean or renew the filter
Clean/adjust or renew the spark plug
Use the correct fuel mixture (ratio
25:1)
SOLUTION
Check the oil tank / fill with saw chain
oil
Clean the oil outlet openings / oil flow
channel / oil guide groove
Unlock the chain brake
SOLUTION
Contact an AL-KO service centre
Contact an AL-KO service centre
Oil the blades lightly
Contact an AL-KO service centre
Contact an AL-KO service centre
Original instructions for use

Publicidad

Tabla de contenido
loading

Tabla de contenido