Replace The Protection Ring; Dust Bag Cleaning; Storage And Cleaning; Environment Safety - VITO PRO-POWER VILG800 Manual De Instrucciones

EN
5.2 - REPLACE THE
PROTECTION RING (FIG. L)
On the perimeter of velcro pad
protection (2) there is a protection ring
(1), that avoids particles projection and
lowers the dust formation. If the ring is
worn it must be replaced.
1. Unfasten the protective ring with a
screwdriver;
2. Remove the ring and replace it for
a new one;
3. Regulate the protection
perforations in the fixing pins on the
velcro pad protection base;

5.3 - DUST BAG CLEANING

(FIG. M)
Clean out the dust bag before it is
completely full.
1. Remove the locking chute of the dust
bag (15);
2. Dump the accumulated dust;
3. Install back the dust bag locking
chute;

5.4 - STORAGE AND CLEANING

Cleaning
After each use clean every components
of the sander. Rub the machine with a
clean and damp cloth or blow it with
low pressure compressed air.
A careful handling protects the machine
and extends its lifespan.
Storage
Keep the sander in its original box,
inside a dry place and away from
children's reach.
The ideal storage temperature is
between 5 and 30 ° C and inside its
original box.
32
6. ENVIRONMENT
SAFETY
The packaging is made up of
recyclable materials, which you
can dispose on local recycling points.
Never place power tools in
the domestic waste!
According to the European Directive
2012/19 /EC
ring electronic equipment waste and its
transposition into national law, power
tools must be collected separately
and delivered to the collection sites
provided for this purpose.
You can obtain information regarding
the disposal of the machine through
the person in charge for the recycling
in your city.
Phone.: 256 331 080
E-mail: sat@centrallobao.pt
Website: www.centrallobao.pt
on electrical and

7. CUSTOMER SERVICE