Installation And Setup; Installation; Connecting The Display - Nvidia 3D VISION Guia Del Usuario

InsTallaTIon anD seTUP

03
iNsTallaTiON aNd seTUp
Installing the hardware and software to your computer
system is pretty straightforward. However, there is a
specific order you must follow. for example, The Usb IR
emitter must not be connected until AFTER the
software and drivers have been installed.
Note: before beginning the installation, make sure your wire-
less glasses are fully charged. see Charging the Glasses on
page 6.

Installation

Connecting the Display

Use the following procedure to install and setup your system for
stereoscopic 3D gaming.
Connect your 3d Vision ready display to your
1.
NVidia graphics card.
The display you connect must be a 3d Vision ready lCd or
analogue CrT display. for lCds use the dual-link dVi-to-dVi
cable supplied with the display.
Note: Connect onlY the display now. The driver and software
must be installed prior to connecting the Usb IR emitter.
see the following pages for connection diagrams.
9