InsTallaTIon anD seTUP
03
iNsTallaTiON aNd seTUp
Installing the hardware and software to your computer
system is pretty straightforward. However, there is a
specific order you must follow. for example, The Usb IR
emitter must not be connected until AFTER the
software and drivers have been installed
Note: before beginning the installation, make sure your
wireless glasses are fully charged. see Charging the Glasses
on page 6.
Installation
Connecting the Display
Use the following procedure to install and setup your system for
stereoscopic 3D gaming.
Connect your 3d Vision ready display to your NVidia graphics
1.
card.
The display you connect must be a 3d Vision ready
lCd or analogue CrT display. for lCds use the dual-
link dVi-to-dVi cable supplied with the display.
Note: Connect onlY the display now. The driver and software
must be installed prior to connecting the Usb IR emitter.
see the following pages for connection diagrams.
9