Worx WX640.1 Manual Original página 8

Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Paper hole punch
Dust box
32mm dust extraction adaptor
35mm dust extraction adaptor
60 Grit clamp sanding paper
80 Grit clamp sanding paper
120 Grit clamp sanding paper
180 Grit clamp sanding paper
8
If using sanding paper without dust holes, you must use the paper punch to make
holes.
Use 1/3 sheet sanding paper of the following size:
Sanding paper size:
93*230mm for no hook & loop (Clamp only)
93*182mm for hook & loop
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
Finishing sander
C or less.
o
wx640.1
1
1
1
1
5
5
5
5
wx640.2
1
1
1
1
2
2
2
/
EN