English ( Original Instructions ); Layout (Fig. 1/2); Items Supplied; Safety Information - Luna BCS 250 Traducción De Instrucciones Originales En Inglés

ENGLISH
Original instructions
CONTENTS
Layout (Fig. 1/2) ......................................................................... 42
Items supplied .............................................................................. 42
Proper use ..................................................................................... 42
Important information .................................................................. 42
Technical data .............................................................................. 44
Before putting the machine into operation ................................... 44
Assembly...................................................................................... 44
Using the saw ............................................................................... 45
Operation ...................................................................................... 46
Maintenance ................................................................................. 46
Ordering replacement parts .......................................................... 46
Exploded view ........................................................................... 105
EC Declaration of conformity .................................................... 108

1. LAYOUT (FIG. 1/2)

1 Saw table
2 Saw blade guard
3 Push stick
4 Saw blade
5 Splitter
6 Table insert
7 Parallel stop
8 Handwheel
9 Adjusting and locking grip
10 Base frame
11 ON/OFF switch
12 Eccentric lever
13 Extractor hose
14 Cross stop
15 Screw with wing nut
16 Extractor adapter
20 Fixing screw
35 Length extension table
36 Width extension table
43 Table support
50 Rubber feet

2. ITEMS SUPPLIED

•
Bench-type circular saw
•
Carbide-tipped saw blade
•
Parallel stop
•
Cross stop
•
Push stick

3. PROPER USE

The bench-type circular saw is designed for the slitting and cross-
cutting (only with the cross stop) of all types of timber, commensu-
rate with the machine's size.
The machine is not to be used for cutting any type of roundwood.
The machine is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user/opera-
tor and not the manufacturer will be held liable for damage and/or
injuries of any kind that result from such misuse. The machine is to
be operated only with suitable saw blades (saw blades made of HM
or CV) It is prohibited to use any type of HSS saw blade and cut-
ting-off wheel. To use the machine properly you must also observe
the safety regulations, the assembly instructions and the operating
instructions to be found in this manual. All persons who use and
service the machine have to be acquainted with this manual and
must be informed about the machine's potential hazards. It is also
imperative to observe the accident prevention regulations in force
in your area. The same applies for the general rules of occupa-
tional health and safety. The manufacturer shall not be liable for
any changes made to the machine nor for any damage resulting
from such changes. Even when the machine is used as prescribed
it is still impossible to eliminate certain residual risk factors. The
following hazards may arise in connection with the machine's con-
struction and design:
•
Contact with the saw blade in the uncovered saw zone.
•
Reaching into the running saw blade (cut injuries).
•
Kick-back of workpieces and parts of workpieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the saw blade.
•
Damage to hearing if ear-muffs are not used as necessary.
•
Harmful emissions of wood dust when used in closed rooms.

4. IMPORTANT INFORMATION

Please read the directions for use carefully and observe the informa-
tion provided. It is important to consult these instructions in order
to acquaint yourself with the machine, its proper use and safety
precautions.

Safety information

•
Warning: When using electric tools it is imperative to take the
following basic safety precautions in order to reduce the risk of
electric shock, injury and fi re.
•
Take due note of all this information before and while working
with the saw.
•
Do not lose these safety regulations.
•
Guard against electric shock Avoid body contact with earthed
parts.
•
When equipment is not being used it should be kept in a dry,
closed place out of children's reach.
•
Keep mounted attachments sharp and clean to enable you to
work well and safely.
•
Check the power cable regularly and have it replaced by an
authorized specialist at the fi rst sign of any damage.
•
Check your extension cables regularly and replace them if
damaged.
•
When working outdoors, use only extension cables that are
approved for outdoor use and which are marked accordingly.
•
Concentrate on what you are doing. Use common sense. Do not
operate the tool if your mind is not on your work.
•
Never use an electric tool with a switch that cannot be turned on
and off.
•
Warning! The use of plug-in tools and accessories other than
those intended may put you at risk of injury.
•
Always pull the plug out of the power socket before adjusting or
servicing the machine.
•
Give these safety regulations to all persons who work on the
machine.
•
Do not use this saw to cut fi re wood.
•
Do not use this saw to cross-cut roundwood.
42