Preselecting The Speed - Flex PE 14-2 150 Instrucciones De Funcionamiento Originales

Switching on and off
Brief operation without engaged switch
rocker
Press and hold down the switch.

To switch off, release the switch.

Continuous operation with engaged
switch rocker
Press and hold down switch (1.).

To lock into position, hold down the

locking button and release the
switch (2.).
To switch off, briefly press and release

the switch.
16
PE 14-2 150, PE 14-1 180

Preselecting the speed

To set the operating speed, move the dial

to the required value.
Gently press the switch to accelerate the

power tool up to the preselected speed.
CAUTION!
Risk of injury due to destruction of the tool.
Use the appropriate tool for the job.
NOTE
If an overload or overheating occurs during
continues operation, the power tool auto-
matically reduces the speed until the power
tool has cooled down adequately.
Attaching the tool holder
Pull out the mains plug.

Press and hold down the spindle

lock (1.).
Screw the tool holder (Velcro pad, fleece

pad) clockwise onto the spindle and
tighten hand-tight (2.).
Attach the tool to the tool holder.

Insert the mains plug into the socket.
