General Information - HK Audio Lucas nano 600 Manual De Instrucciones

Lucas Nano 600 1.0

1 General Information

1.1 Unpacking and Inventorying
Remove all the component parts of LUCAS NANO 600 from the carton
and make sure you have received all items.
LUCAS NANO 600 consists of a subwoofer and two satellites.
A protective cover and a mains cable are also included.
1.2 Unfastening Transport Latches
Latches secure the LUCAS NANO 600 satellites to the subwoofer to
protect them during transport. Here's how to undo them:
• Set the subwoofer with front of the speaker facing down and turn the
locking knobs on both sides rearward to unlock the satellites. Remove
the two LUCAS NANO 600 satellites from their cradle.
• Always make sure these knobs engage to lock the speakers down for
transport.
4
1.3 Easy Click Connector
• This mechanical and electric coupler connects the modules.
• To release the Easy Click latch, hold the pair of satellites with their
back panels facing you so that you can read the inscription Push to
Release on the one satellite. Push this satellite forward and then lift
straight up to remove it.
• To secure the Easy Click latch, hold the satellite with the inscription
Push to Connect with the back facing you and the pole mount pointing
up so you can read this inscription. Hold the top satellite upright with
the pole mount facing up as you lower and insert it into the Easy Click
connector, and then push forward.
1.4 Pole Mount on the Subwoofer
This M20 internally threaded shaft on top of the subwoofer accepts a
speaker extension pole with a diameter of 35 mm such as the optional
LUCAS NANO 600 MONO STAND ADD-ON.
1.5 Pole Mount on the Satellites
This 3/8" internally threaded shaft on LUCAS NANO 600 satellites
serves to mount the satellites to poles, tripods and microphone stands
with an externally threaded 3/8" tip.